其实桥架本身没有强弱电之分，但在安装过程中是有一定要求的，高低压电缆桥架应尽量分开安装，那么强电桥架和弱电桥架之间的区别是什么呢？

In fact, the bridge itself is not divided into strong and weak current, but there are certain requirements in the installation process. High and low voltage cable bridges should be installed separately as far as possible. What is the difference between strong current bridge and weak current bridge?

电缆桥架用于铺设电缆，电气中的电缆在暗处敷设时（埋地或埋在地板、墙内等）例如在车间梁下吊起约300座桥、喷塑电缆桥架、敷设电缆在桥梁上。这里的电缆不需要用保护管（镀锌钢管或塑料管）护套。

Cable tray is used to lay cables. When cables in electrical are laid in the dark (buried or buried in the floor, wall, etc.), for example, about 300 bridges are hoisted under the workshop beam, plastic sprayed cable tray and cables are laid on the bridge. The cable here does not need to be sheathed with protective pipe (galvanized steel pipe or plastic pipe).

通常有梯形桥、槽桥等材料有热镀锌钢、电镀锌、喷塑、玻璃钢等。目前没有专门的规范指导，各厂家的规格和形式缺乏普遍性。因此，设计和选型过程中应根据各电气系统的电缆类型和数量，合理选择适用的桥架。

There are usually trapezoidal bridges, trough bridges and other materials, such as hot-dip galvanized steel, electro galvanized, plastic spraying, FRP and so on. At present, there is no special specification and guidance, and the specifications and forms of various manufacturers are lack of universality. Therefore, in the process of design and type selection, the applicable bridge shall be reasonably selected according to the cable type and quantity of each electrical system.

事实上电缆桥架本身没有强电和弱电之分，完全一样。用这种桥来分配强电称为强电桥。如果此桥用于弱电，则称为弱电桥。只是用途上的不同，它们的材质、规格、颜色、安装方式都是一样的，外观上没有区别。

In fact, the cable tray itself is not divided into strong current and weak current, which is exactly the same. Using this bridge to distribute strong electricity is called strong electricity bridge. If this bridge is used for weak current, it is called weak current bridge. There is no difference in appearance, material and color.

但是，在安装过程中有一定的要求。大多数强弱电桥不共用，一般设计是分开的。由于强电流会在电缆导体周围形成强磁场，在电源强时影响弱电流信号，因此应将其隔开或在同一桥架内设置钢板隔板隔开。

However, there are certain requirements in the installation process. Most strong and weak bridges are not shared and are generally designed separately. Since strong current will form a strong magnetic field around the cable conductor and affect the weak current signal when the power supply is strong, it should be separated or set up a steel plate partition in the same bridge.

山东电缆桥架提醒大家，一般情况下，弱电桥的尺寸比强电桥小，材质和外观相同。但严格来说，在安装和使用桥梁时，必须将强电和弱电分开，不能放在一座桥上。

Shandong cable bridge reminds you that in general, the size of weak current bridge is smaller than that of strong current bridge, and the material and appearance are the same. But strictly speaking, when installing and using bridges, strong current and weak current must be separated and cannot be placed on one bridge.

强电桥架和弱电桥架之间的区别内容就讲解到这里了，如果您对该桥架有需求的话，欢迎关注我们的网站 www.comprepyme.com，我们生产安装各种桥架，能够满足您的需要。

The difference between strong current bridge and weak current bridge is explained here. If you need this bridge, please pay attention to our website www.sddlqj.com Cn, we specialize in the production and installation of various bridges, which can meet your needs.