江南app官方入口在哪里看到经常清洗和清理。被油污染的表面和其他东西可以用普通的家用清洁剂清洗。不要使用腐蚀性溶剂，也不要使用洗洁精和电线进行清洗，以免留下划痕，影响美观。

Jinan bridge is often cleaned and cleaned. Oil-contaminated surfaces and other things can be cleaned with ordinary household cleaners. Do not use corrosive solvents, and do not use detergent and wires for cleaning, so as not to leave scratches and affect the appearance.

如果污渍难以去除，可用汽油、煤油、柴油、甲苯、二甲苯、苯乙烯、丙酮等清洗。但清洗后需要立即用水清洗，防止其侵入内部结构。

If the stain is difficult to remove, it can be cleaned with gasoline, kerosene, diesel, toluene, xylene, styrene, acetone, etc. However, it needs to be cleaned with water immediately after cleaning to prevent it from invading the internal structure.

清理桥架时，电缆桥架应使用硬度低于玻璃钢的竹片或塑料板，或使用工具刮刀，防止清理时工具刮伤桥架表面。洗的时候可以用汗布、纱布、软毛巾、软泡沫等柔软的材料。

When cleaning the bridge, the cable bridge shall be made of bamboo or plastic sheet with a hardness lower than that of fiberglass, or a tool scraper shall be used to prevent the tool from scratching the bridge surface during cleaning. When washing, you can use soft materials such as sweat cloth, gauze, soft towel, soft foam, etc.

玻璃钢桥梁应及时清理盐霜，在该海域航行的船舶应及时清理附着在船舶表面的盐晶体(盐霜)。由于盐晶体在阳光下具有凸透镜的聚焦作用，表面玻璃钢电缆桥架在高温下会加速老化。

The FRP bridge beam shall be cleaned of salt frost in time, and the ships sailing in the sea area shall be cleaned of salt crystals (salt frost) attached to the ship surface in time. Because the salt crystal has the focusing effect of convex lens in the sun, the surface glass fiber reinforced plastic cable bridge will accelerate aging under high temperature.

在设计布线方法和路由选项的安排时，应加以区分。它们既要满足规范的要求，又要考虑布线的安全性、可扩展性、经济性和美观性，便于维护。

It should be distinguished when designing the arrangement of wiring methods and routing options. They should not only meet the requirements of the specification, but also consider the safety, scalability, economy and aesthetics of the wiring for easy maintenance.

电缆桥架作为各种电缆敷设的载体，从属于布线的需要，也应按上述原则执行。由于建筑内各种管线平行交叉，空间有限，尤其是大型写字楼、金融商业楼、酒店、体育场馆等建筑，信息点密集。除了地板槽和墙壁中的埋管之外，电缆槽广泛用于竖井和室内天花板中，以提供不同方向的布线。弱电系统的各种电缆按类别分布在桥架内，走线选择和安装方式应根据方向的要求，结合建筑结构、空调、电力等。

As the carrier of all kinds of cable laying, the cable tray is subordinate to the needs of wiring and should also be implemented according to the above principles. Due to the parallel intersection of various pipelines in the building, the space is limited, especially for large office buildings, financial and commercial buildings, hotels, stadiums and other buildings, with dense information points. In addition to the buried pipes in the floor trough and wall, the cable trough is widely used in shafts and indoor ceilings to provide wiring in different directions. Various cables of the weak current system are distributed in the bridge according to the category. The routing selection and installation method should be based on the requirements of the direction, combined with the building structure, air conditioning, power, etc.

同时，金属隔板需要单独使用，引出电缆应尽量避免平面交叉。当桥梁穿越楼板、墙体或伸缩缝时，应在建筑图上标出相应的孔洞和位置，避免因疏漏造成施工时临时打洞，伤害土建结构。为了防止电磁干扰，在桥梁的设计中应考虑桥梁的封闭性。更多相关事项就来我们网站 //www.comprepyme.com咨询吧！

At the same time, the metal partition needs to be used separately, and the outgoing cable should avoid plane crossing as much as possible. When the bridge crosses the floor slab, wall or expansion joint, the corresponding holes and positions shall be marked on the architectural drawing to avoid temporary holes during construction caused by negligence and damage to the civil structure. In order to prevent electromagnetic interference, the closure of the bridge should be considered in the design of the bridge. Come to our website for more relevant matters //www.comprepyme.com Ask!