1. Electricians and welders of fiberglass cable trays must hold operation certificates issued by professional exams.

2、焊工对进入现场的电焊机，在使用前应严格检查是否有漏电、短路、接触不良等现象，否则不得投入使用，严禁带病焊接。工作结束时应及时切断电源，将焊机盖上防水材料。

2. Welders should strictly inspect the electric welding machine entering the site for any leakage, short circuit, poor contact, etc. before use, otherwise it cannot be put into use and welding with defects is strictly prohibited. At the end of the work, the power should be cut off in a timely manner and the welding machine should be covered with waterproof materials.

3、严格按照电缆桥架安全操作规程进行施工，不可违章操作、无电工人使用电焊机。电焊工没有操作证，不可以使用电焊机。

3. The construction shall be carried out in strict accordance with the safe operation procedures for cable tray, and no operation against rules or use of electric welding machine without electrician is allowed. Welders are not allowed to use electric welding machines without operating certificates.

4、用电锤、现场照明灯具等玻璃钢桥架的零件必须由电工负责接线，并试运正常后方可使用。如场地潮湿，操作者必须穿绝缘鞋，带绝缘手套，否则不准使用。禁止用铝丝，铜丝，铁丝等代替熔断器。

4. The components of fiberglass cable trays such as electric hammers and on-site lighting fixtures must be wired by electricians and tested for normal operation before use. If the site is damp, operators must wear insulated shoes and gloves, otherwise they are not allowed to use it. It is prohibited to replace fuses with aluminum wire, copper wire, iron wire, etc.

5、电工要严格执行玻璃钢桥架安全技术操作规程，不可违章操作。在土建工程和其它工程的交叉施工中应做到“一慢、二看、三过”。对施工中发现的不安全因素应及时与施工负责人联系，待解决后方可施工，不得进行危险施工。

5. Electricians must strictly follow the safety technical operating procedures for fiberglass cable trays and must not operate in violation of regulations. In the cross construction of civil engineering and other projects, it is necessary to achieve "one slow, two look, and three passes". Any unsafe factors discovered during construction should be promptly contacted by the construction manager, and construction can only be carried out after they are resolved. Dangerous construction is not allowed.

6、进入玻璃钢桥架施工现场必须戴好安全帽，按照规定着装，不戴安全帽不准进入施工现场。进入施工现场，不可以私自使用各种电动机械、工具和其它设备。现场管理人员必须牢固树立安全，预防为主的安全思想，在生产进度和施工安全之间发生矛盾时，必须首先做到安全，工作人员不得违章指挥施工。

6. When entering the construction site of fiberglass cable trays, one must wear a safety helmet and dress according to regulations. Without wearing a safety helmet, one is not allowed to enter the construction site. Entering the construction site, it is not allowed to use various electric machinery, tools, and other equipment without permission. On site management personnel must firmly establish a safety mindset of putting safety first and prevention first. When there is a conflict between production progress and construction safety, safety must be achieved first, and staff must not command construction in violation of regulations.

本文由 山东电缆桥架友情奉献.更多有关的知识请击: //www.comprepyme.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is contributed by cable tray in Shandong Province. For more information, please click: //www.comprepyme.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned