虽然现在电缆桥架随处可见,使用的领域也越来越多,但是我们在进行使用的时候需要进行安装,有时候在进行安装的时候会碰到不同的管道,因为不同管道的性能也是不一样的,所以在进行安装产品的时候,如果不让产品和管道保持一定的距离,就会导致产品受到一些损坏,所以在进行安装的时候遇到管道的时候,我们应该保持一定的距离,那不同管道保持的距离应该是多少呢?
Although cable trays can be seen everywhere now and are used in more and more fields, we need to install them when we use them. Sometimes we will encounter different pipes when we install them. Because the performance of different pipes is different, when installing products, if we don't keep a certain distance between the products and the pipes, It will cause some damage to the product, so when we encounter pipelines during installation, we should keep a certain distance. What should be the distance between different pipelines?
1、电缆桥架与热力管道平行架设,热力管道有保温层时不小于500mm,无保温层时不小于1000mm。
1. The cable tray shall be erected in parallel with the thermal pipeline, and the thermal pipeline shall not be less than 500mm with thermal insulation layer and 1000mm without thermal insulation layer.
2、在进行安装的时候不宜在输送具有腐蚀性液体管道的下方或具有腐蚀性气体管道上方平行安装。当无法避免时,应不小于500mm。且其间应用防腐隔板隔开。
2. During the installation, it is not suitable to install in parallel below the pipeline conveying corrosive liquid or above the pipeline conveying corrosive gas. When it cannot be avoided, it shall not be less than 500mm. And they should be separated by anti-corrosion partition.
3、电缆桥架不宜在热力管道的上方平行安装,当无法避免需在热力管道上方平行安装时,应不小于1000mm,其间应采取有效的隔热措施。
3. The cable tray should not be installed in parallel above the heat pipe. When it is unavoidable to install in parallel above the heat pipe, it should not be less than 1000mm, and effective heat insulation measures should be taken.
4、产品与一般工艺管道(如压缩空气管道等)平行架设时不小于400mm。
4. When the product is erected in parallel with the general process pipeline (such as compressed air pipeline), it shall not be less than 400mm.
5、电缆桥架与具有腐蚀性液体管道平行架设时不小于500mm。
5. When the cable tray is erected in parallel with the corrosive liquid pipeline, it shall not be less than 500mm.
为了在进行安装电缆桥架的时候不会因为一些错误的距离导致产品遭受腐蚀或者损坏,在进行安装产品的时候碰到管道的时候,可以首先判断管道的性质,然后在根据以上的距离进行安装,做好相应的保护措施。为了以后更好的使用,在使用过程中要定期的对产品进行维护保养,以防在使用过程中发生问题。
In order to prevent the product from corrosion or damage due to some wrong distance when installing the cable tray, when installing the product and touching the pipeline, you can first judge the nature of the pipeline, and then install according to the above distance, and take corresponding protective measures. In order to better use in the future, the product should be maintained regularly in the process of use, in order to prevent problems in the process of use.
Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Jinan cable bridge //www.comprepyme.com .