为了便于更好的提高桥架产品的质量以及使用寿命，就需要对施工的每个环节以及需要注意事项，做一个精密的规范才行。在安装完成后的时间里，有时候电缆桥架会出现一些故障，出现故障时不要慌张，仔细看看以下哪一类，然后根据情况做好相应的措施！

In order to better improve the quality and service life of bridge products, it is necessary to make a precise specification for each link of construction and precautions. In the time after installation, sometimes there will be some faults in the cable tray. Don't panic when there are faults. Take a careful look at which of the following categories, and then take corresponding measures according to the situation!

1、不锈钢桥在整个电缆中被烧毁或某相被烧毁，这样的故障造成配电柜对当前继电器的运行，电缆损坏时故障相当严重。

1. The stainless steel bridge is burnt out in the whole cable or a phase is burnt out. Such a fault causes the distribution cabinet to operate the current relay, and the fault is quite serious when the cable is damaged.

2、另外企业为了电力电缆安全。以电缆的大允许弯曲半径为拐角处的准则。可以去实地进行考察合作方考察下该生产商，须充分了解该电缆桥架厂家是否需要具有社会生产管理能力，原材料的质量，产品安全检查技术手段，营业证书是否齐全。

2. In addition, for the safety of power cables. Take the large allowable bending radius of the cable as the criterion at the corner. You can go to the field to investigate. The partner must fully understand whether the cable tray manufacturer needs to have the social production management ability, the quality of raw materials, the technical means of product safety inspection, and whether the business certificate is complete.

3、应选择电缆桥架的安装地点，以方便敷设为准。一般应在电缆起点和终点附近。

3. The installation location of cable tray shall be selected to facilitate laying. Generally, it should be near the beginning and end of the cable.

此外 山东电缆桥架设备的维护保养非常重要，直接影响到设备的使用寿命。拆除电缆桥架设备后，应注意将拆除的部件放置在工作台或支架上。零件拆卸后，应做好标记，以免组装时出现混乱和不便。拆下螺栓、螺母、垫圈和其他需要在煤油或热苏打溶液中清洁的部件，清洁所有部件，并在使用过的电缆桥架设备出现之前重新组装。

In addition, the maintenance of Shandong cable tray equipment is very important, which directly affects the service life of the equipment. After removing the cable tray equipment, pay attention to placing the removed parts on the workbench or support. After the parts are disassembled, they should be marked to avoid confusion and inconvenience during assembly. Remove bolts, nuts, washers and other components that need to be cleaned in kerosene or hot soda solution, clean all components, and reassemble before the used cable tray equipment appears.

在日常维护和检修中，应经常在有齿轮的地方涂抹润滑油，以保证正常运转。无论是电缆桥架设备还是冷弯成型设备，每天检查机器。在生产中，还要注意调试和清洗。严格遵守生产要求，发现问题及时解决，避免出现大问题。

In daily maintenance and overhaul, the place with gears should be often coated with lubricating oil to ensure normal operation. Whether it is cable tray equipment or cold bending forming equipment, check the machine every day. In production, we should also pay attention to debugging and cleaning. Strictly abide by production requirements, and solve problems in time to avoid major problems.

例如，桥梁设备和冷弯设备虽然有区别，但它们的工作原理是一样的，所以我们可以检查受力是否均匀。合理设计配置。特别是在以下程序中，变形不宜过大。较小的变形可以减轻故障。按照规定对电缆桥架设备进行定期维护，可以提高其性能，延长其使用寿命。

For example, although there are differences between bridge equipment and cold bending equipment, their working principle is the same, so we can check whether the force is uniform. Reasonable design and configuration. Especially in the following procedures, the deformation should not be too large. Small deformation can reduce the fault. Regular maintenance of cable tray equipment according to regulations can improve its performance and prolong its service life.

对于电缆桥架行业来说，加强行业监督和管理也是必不可少的。行业应成立联合会，负责定期抽检桥架进行质检，还需要制定惩奖制度，激励电缆桥架厂家生产优质桥架产品。更多相关内容您可以关注我们网站 //www.comprepyme.com咨询了解。

For the cable tray industry, it is also essential to strengthen industry supervision and management. The industry should establish a federation to be responsible for regular sampling inspection of cable trays for quality inspection, and also need to formulate a punishment and reward system to encourage cable tray manufacturers to produce high-quality cable tray products. You can follow our website for more relevant content //www.comprepyme.com Consult and understand.