电缆桥架是一种常见设备，主要作用是架起电线，是由托盘式、梯级式、槽式的直线段、弯通、三通、四通组件以及托臂、吊架等构成，电缆桥架分为：槽式、托盘式、梯级式电缆桥架，那么，在日常运用中如何保养梯级式电缆桥架呢？ 山东电缆桥架厂家为您讲解。

Cable tray is a common equipment, which is mainly used to erect wires. It is composed of tray type, ladder type, trough type straight section, elbow, three-way, four-way components, corbel, hanger, etc. The cable tray is divided into: trough type, tray type, ladder type cable tray. How to maintain the ladder type cable tray in daily use? Shandong cable tray manufacturer will explain to you.

电缆桥架起备在运用过程中必定要注意方式方法，注意做好定时清洁和保养工作，电缆桥架起备用水冲洗后要擦干净，注意需求除掉污物及剩余的润滑油等。

During the operation of the cable tray, attention must be paid to the methods, regular cleaning and maintenance. The cable tray shall be cleaned with water after it is cleaned, and the dirt and residual lubricating oil shall be removed.

桥架之间、直段之间以及弯曲或变化的直通通道之间的连接须由桥架制造商进行。接头薄钢板的厚度不得小于桥架的厚度。界面应光滑，无扭曲、凸、凹。连接时使用的半圆头镀锌螺栓应在桥内。

Connections between bridges, between straight sections, and between curved or variable through passages must be made by the bridge manufacturer. The thickness of the joint steel sheet shall not be less than the thickness of the bridge. The interface shall be smooth without distortion, convex and concave. The semicircle head galvanized bolts used for connection shall be inside the bridge.

螺栓的长度须合适。紧固后，露出长度应为2~5齿。对于水平安装的桥架，直线段连接件应尽可能位于两个分支吊架之间的约1/4处。

The length of bolts must be appropriate. After fastening, the exposed length shall be 2-5 teeth. For horizontally installed cable tray, the straight section connector shall be located at about 1/4 of the distance between two branch hangers as far as possible.

如果有需求，可将电缆桥架起备拆卸后进行清洁与保养，注意把梯级式电缆桥架起备上拆下来的部件放在工作台或支架上，以便进一步把部件拆成零件，拆除后，应在零件上做记号，防止零件混杂，拼装不方便，然后造成麻烦。

If necessary, the cable tray can be cleaned and maintained after it is disassembled. Pay attention to placing the components removed from the ladder type cable tray on the workbench or support, so that the components can be further disassembled into parts. After removal, marks should be made on the parts to prevent them from being mixed, inconvenient to assemble and causing trouble.

从电缆桥架起备上拆下的螺栓、螺帽、垫圈等零部件要放在火油或热苏打溶液中清洗，悉数零件整理干净之后，要重新拼装回之前电缆桥架起备运用的姿态，各零件须装在原处，并试运行看是否正常，定时按照规定给电缆桥架起备做保养，可以提高其运用性能，并延长运用寿命。

The bolts, nuts, washers and other parts removed from the cable tray shall be cleaned in kerosene or hot soda solution. After all the parts are sorted out, they shall be reassembled back to the original position of the cable tray for use. All the parts must be installed in the original place and tested for normal operation. The cable tray shall be regularly prepared for maintenance according to the regulations, which can improve its performance and extend its service life.

此外要运行电缆桥架，须确定合适的类型，并按照相关规定进行运行。由于电缆桥架的运营规模不同，因此需要确定合适的类型。请不要随便选择运用。不仅不能保证正常使用，而且桥架的寿命也会缩短。更多相关维护电缆桥架事项就来我们网站 //www.comprepyme.com看看吧！

In addition, to operate the cable tray, the appropriate type must be determined and operated according to relevant regulations. Due to the different operation scale of cable tray, it is necessary to determine the appropriate type. Please do not use it randomly. Not only can not guarantee the normal use, but also the service life of the cable tray will be shortened. For more information about cable tray maintenance, please visit our website //www.comprepyme.com Look!