电缆桥架设备的维护非常重要，直接影响设备的使用寿命。清洁设备是维护中的一项重要任务。下面 山东电缆桥架厂家为您讲解。

The maintenance of cable tray equipment is very important, which directly affects the service life of equipment. Cleaning equipment is an important task in maintenance. Next, Shandong cable tray manufacturer will explain to you.

拆除电缆桥架设备后，应注意将拆下的零件放在工作台上或支架上，零件分解完成后，要做好标记，避免组装时的混乱和不便。拆下螺栓、螺母、垫圈和其他需要在煤油或热苏打溶液中清洗的零件，清洗所有零件，并在出现之前重新组装使用的电缆桥架设备。

After the cable tray equipment is removed, the removed parts shall be placed on the workbench or support. After the parts are disassembled, they shall be marked to avoid confusion and inconvenience during assembly. Remove bolts, nuts, washers and other parts that need to be cleaned in kerosene or hot soda solution, clean all parts, and reassemble the cable bridge equipment used before it appears.

当我们在清洁电缆桥架时，我们只需要用一块干净的布轻轻地擦拭桥上的灰尘。不要用湿布和酸性化学品擦拭。这会使桥架的耐腐蚀性越来越差。它还会破坏电缆桥架表面涂层的稳定性，甚至造成腐蚀。也可以用光蜡，因为电缆桥架的存放时间变长了，光泽度自然变暗，否则会变亮，先把桥的不干净的东西清理干净，再涂上蜡光晾干。既适合美观，又增强了电缆桥架本身的抗氧化能力。

When we are cleaning the cable tray, we only need to use a clean cloth to gently wipe the dust on the bridge. Do not use wet cloth and acid chemicals to wipe. This will make the corrosion resistance of the cable tray worse and worse. It will also damage the stability of the cable tray surface coating, and even cause corrosion. Light wax can also be used, because the storage time of the cable tray becomes longer, the glossiness will naturally darken, otherwise it will become bright. Clean up the unclean things on the bridge first, and then apply wax to dry. It is not only suitable for beauty, but also enhances the oxidation resistance of the cable tray itself.

当电缆桥架的区域在维修过程中发现被腐蚀时，我们只需要用防腐涂料对其进行干燥，以提高桥架的防腐寿命。厚防腐涂层使桥架质量更加稳定。

When the cable tray area is found to be corroded during maintenance, we only need to dry it with anti-corrosion paint to improve the anti-corrosion life of the cable tray. The thick anti-corrosion coating makes the bridge quality more stable.

在日常维护和检修中，要经常在有齿轮的地方涂润滑油，以保证正常运转。无论是电缆桥架设备还是冷弯滚压成型设备，每天都要对机器进行检查。在生产中，也要注意调试和清洗。严格遵守生产要求，发现问题及时解决，避免造成重大问题。

During daily maintenance and overhaul, lubricating oil shall be applied to the gear to ensure normal operation. Whether it is cable bridge equipment or cold bending rolling forming equipment, the machine shall be inspected every day. During production, attention should also be paid to debugging and cleaning. Strictly abide by the production requirements, and solve the problems found in time to avoid causing major problems.

清洁电缆桥架是维护中的一项重要任务，您看完以上内容就知道为何这样说了，对此您有问题就来我们网站 //www.comprepyme.com咨询吧！

Cleaning the cable tray is an important task in maintenance. After reading the above content, you will know why it is said like this. If you have any questions, please come to our website //www.comprepyme.com Consult!