◆ Mold

穿孔工艺始于精密模具设计，我们认为模具质量在很大程度上决定了产品的质量。因此，近年来，我们投入了大量资源来使我们的建模能力得到显着提高。

The perforation process begins with precision mold design, and we believe that the quality of the mold largely determines the quality of the product. Therefore, in recent years, we have invested a significant amount of resources to significantly improve our modeling capabilities.

◆ 穿孔 开槽

◆ Perforation and slotting

我们拥有先进的数控设备，系统罐头产品质量高，产量可达2,000个，系统罐头板厚度在0.1mm-25mm之间。开槽孔可以是圆形，方形，菱形和微米。带孔的梯子和通道托盘通常开在圆孔或方孔中，以进行通风和固定操作。

We have advanced CNC equipment, and the system has high quality canned products with a production capacity of up to 2000. The thickness of the system's canned boards is between 0.1mm-25mm. Slotted holes can be circular, square, diamond shaped, and micrometer shaped. Ladders and channel trays with holes are usually opened in circular or square holes for ventilation and fixing operations.

◆ 切割

◆ Cutting

将板上的全部体积切成制作梯子或通道电缆桥架所需的尺寸。

Cut the entire volume of the board into the dimensions required to make a ladder or channel cable tray.

◆ 切割边缘

◆ Cutting edges

如果制版过程超出了您的要求范围，我们熟练的技术人员将根据您的要求帮助您去除多余的边缘

If the plate making process exceeds your requirements, our skilled technical personnel will assist you in removing excess edges according to your requirements

◆ 将穿孔板

◆ Insert the perforated plate

平整和弯曲成托盘形式我们可以在穿孔板变形之前使用校对机系统，以恢复其原始状态。0.8mm-12mm的板厚可以完全平整。

We can use a proofreading machine system to restore the original state of the perforated plate before it is deformed and bent into a tray form. A plate thickness of 0.8mm-12mm can be completely flat.

◆ 清洁的

◆ Clean

穿孔工艺需要使用润滑剂，但是我们还有一个脱脂工艺，可以去除其表面痕迹。

The piercing process requires the use of lubricants, but we also have a degreasing process that can remove surface marks.

◆ 成型件的生产与加工

◆ Production and processing of formed parts

除订购外，我们还可以为您提供一系列后续加工，包括：平整，切割，贴标，包装，除油，刺形，退火，喷漆，电镀，焊接，磨，弯曲，卷等。

In addition to ordering, we can also provide you with a series of subsequent processing, including: leveling, cutting, labeling, packaging, degreasing, shaping, annealing, painting, electroplating, welding, grinding, bending, rolling, etc.

◆多孔金属电缆桥架的表面处理：共有四种类型，包括粉末涂料，镀锌，热浸，阳极氧化。可以为您定制。

◆ Surface treatment of porous metal cable trays: There are four types, including powder coating, galvanizing, hot dip, and anodizing. We can customize it for you.

打孔，整个和平过程会导致切割和钣金表面不完整，但是这些不完整在一般工业供应中是可以接受的。如果您有特殊要求，我们将例如通过粉末喷涂或喷漆喷涂，电镀锌，热浸镀锌，阳极氧化等附加措施来防止。

Punching, the entire process of smoothing, can result in incomplete cutting and sheet metal surfaces, but these imperfections are acceptable in general industrial supply. If you have special requirements, we will take additional measures such as powder spraying or spray painting, electro galvanizing, hot dip galvanizing, anodizing, etc. to prevent it.